0102030405
Shaabada Shaabadadda Shabakadda Vs Shabakadda Lala Baxay: Hagaajinta Wax-soo-saarka baytariga-Aashitada-lead ee Qiimaha iyo Waxqabadka | Kooxda MINHUA
2025-02-21
Module Isbarbardhigga Farsamada (Infographic-Friendly)
1. Mabaadi'da Geedi Socodka Muhiimka ah
| Halbeegga | Balaadhinta Grid | Shaabadaysan |
|---|---|---|
| Diyaarinta agabka | Leedhka dhalaalay → shubid joogto ah (0.8-2.0mm faliq ah) | Leedhka dhalaalay → rogid joogto ah (1.2-3.0mm xariijimo) |
| Habka Samaynta | Feedh + Kala Bixinta Makaanikada (18-25m/min) | Shaabadaynta saxda ah (300-500 istaroog/daqiiqo) |
| Dulqaadka cabbirka | ±0.2mm | ±0.05mm (caaryada ku tiirsan) |
| Qalabka Muhiimka ah | Mashiinka ballaarinta | Cadaadis dhinta oo horumarsan |
Farqiga Muhiimka ah:
- Shabakadaha shaambada leh waxay ku tiirsan yihiin caaryada saxda ah ee saxda ah (± 0.05mm) ee joomatariyada adag; shabagyada la balaariyay ayaa mudnaanta siinaya dabacsanaanta oo leh sax hoose.
2. Halbeegyada Waxqabadka
2.1 Xoogga Makaanikada (ASTM E8 Standard)
| Qiyaasta Tijaabada | Balaadhinta Grid | Shaabadaysan |
|---|---|---|
| Xoogga Jilicsan | 38-42 MPa | 55-62 MPa |
| Kordhinta xilliga Nasashada | 15-18% | 8-12% |
| Nolosha daalka (wareegga) | 5,000 | 8,000+ |
U hoggaansanaanta ASTM E8:
- Dhererka cabbirka: 4D (E8) ama 5D (E8M) diyaarinta muunad joogto ah.
- Heerka cadaadiska: 0.015 ± 0.006 mm / mm / min (xakamaynta xir-xiran).
2.2 Dhaqaalaha Soosaarka (USD/10k Cutub)
| Qaybta Qiimaha | Balaadhinta Grid | Shaabadaysan |
|---|---|---|
| Qiimaha Qalabka | 0 | 700-1,200 |
| Qiimaha tamarta | 120 | 180 |
| Dib u warshadaynta qashinka | 25 | 85 |
| Wadarta Qiimaha | 145 | 965+ |
Aragtida Furaha:
- Shabakadaha shambabada leh waxay ku kacayaan 75% kharashyada qalabaynta, oo lagu isticmaali karo kaliya wax soo saarka guud; shabaqyada la balaariyay ayaa hoos u dhigaya heerarka qashinka 70%, oo ku habboon mashaariicda xasaasiga ah.
Tilmaamaha Codsiga Warshadaha
3. Xaalado lagu taliyay
| Farsamada | Codsiyada |
|---|---|
| Balaadhinta Grid | ? Bateriga SLI Automotive (> 100k unug / bishii) |
| ? Mashaariicda ESS ee qiimaha leh (40% ka hooseeya CAPEX) | |
| ? Nakhshado jaangooyo jaangooyo ah (qaab dheeman/gees ah) | |
| Shaabadaysan | ? Beteriyada bilowga joogsiga/wareegga qoto dheer (> 1,200 wareegyada, IEC 61427) |
| ? Geometries gaar ah (shirkad malabka/radial) | |
| ? Dulqaad sare oo sax ah (kala duwanaanshiyaha dhumucda |
Falanqaynta Muuqaal:
- Nidaamyada Joojinta Bilawga: Xoogagga xajinta ee shambabada leh (55-62 MPa) iyo nolosha daalka (8,000+ wareegyada) waxay la kulmaan dalabaadka lacag-bixinta ee joogtada ah.
- Mashaariicda ESS: Wadarta qiimaha shabakadaha la balaariyay (145 USD/10k unug) waxay ku habboon tahay hawlgelinta xasaasiga ah ee CAPEX, oo leh nashqado heersare ah oo suurtagelinaya miisaan.
Isbeddellada Hal-abuurka & Tix-raacyada
- Geometries Grid AdvancedShabakadaha shaambada leh waxay awood u siinayaan 18% wax soo saar firfircoon oo sarreeya iyada oo loo marayo qaabdhismeedka armallada malabka, oo lagu ansaxiyay mashaariicda ESS-samaynta (tusaale, Xinjiang Bazhou Shared ESS).
- Tignoolajiyada caaryada: GREE's ± 0.001mm caaryada saxda ah iyo 380-strokes/daqiiqo xawaaraha shaabadeynta ayaa dardargelinaya ku-qaadashada baytariyada EV-ga qaaliga ah.
In ka badan 95% Macaamiisha Farxada leh!
Si diiran u soo dhawoow dhammaan macaamiisha cusub iyo kuwii horeba inay soo booqdaan shirkadeena. Kooxda iibka xirfadlayaasha ah si ay u bixiyaan jawaab degdeg ah iyo adeeg wanaagsan. Had iyo jeer waxaan ku jirnaa adeeggaaga haddii aad wax baahi ah qabto. Inaga oo rajaynayna mustaqbalka iskaashi qoto dheer iyo guul midaysan!
WAX BADAN KA BARO