0102030405
Grid e Tempetsoeng vs Grid e Atolositsoeng: Ho Ntlafatsa Tlhahiso ea Battery ea Lead-Acid bakeng sa Lit?enyehelo le Ts'ebetso | Sehlopha sa MINHUA
2025-02-21
Tekheniki Papiso ea Mojule (Infographic-Friendly)
1. Melao-motheo ea Ts'ebetso ea Core
| Paramethara | Grid e Atolositsoeng | Grid e Tempetsoeng |
|---|---|---|
| Tokisetso ea lintho tse bonahalang | Loto e qhibilihisitsoeng → Ho lahla ho tsoelang pele (0.8-2.0mm strip) | Loto e qhibilihisitsoeng → Ho thetheha ho tsoelang pele (1.2-3.0mm strip) |
| Mokhoa oa ho theha | Ho otla + ho otlolla mochini (18-25m/min) | Ho hatisa ka nepo (300-500 strokes/min) |
| Mamello ea Dimensional | ± 0.2mm | ±0.05mm (e itshetlehile ka hlobo) |
| Thepa ea Bohlokoa | Mochini oa ho atolosa | Progressive die stamping press |
Liphapang Tsa Sehlooho:
- Li-grid tse entsoeng ka setempe li it?etlehile ka liforomo tse nepahetseng haholo (± 0.05mm) bakeng sa lijeometri tse rarahaneng; li-grids tse atolositsoeng li etelletsa pele ho fetoha le maemo ka nepo e tlase.
2. Melemo ea Ts'ebetso
2.1 Matla a Mechine (ASTM E8 Standard)
| Teko Parameter | Grid e Atolositsoeng | Grid e Tempetsoeng |
|---|---|---|
| Matla a t?epe | 38-42 MPa | 55-62 MPa |
| Elongation at Break | 15-18% | 8-12% |
| Bophelo ba Mokhathala (Lipotoloho) | 5,000 | 8,000+ |
Tumellano ea ASTM E8:
- Bolelele ba gauge: 4D (E8) kapa 5D (E8M) bakeng sa tokiso e tsitsitseng ea mohlala.
- Sekhahla sa khatello: 0.015± 0.006 mm / mm / min (taolo e koetsoeng ea loop).
2.2 Moruo oa Tlhahiso (USD/10k Units)
| Sehlopha sa lit?enyehelo | Grid e Atolositsoeng | Grid e Tempetsoeng |
|---|---|---|
| Theko ea Lisebelisoa | 0 | 700-1,200 |
| Theko ea Matla | 120 | 180 |
| Pheliso ea Matlakala | 25 | 85 |
| Kakaretso ea Lit?enyehelo | 145 | 965+ |
Kutloisiso ea Bohlokoa:
- Li-grids tse entsoeng ka setempe li na le lit?enyehelo tsa 75% tsa lisebelisoa, tse sebetsang feela bakeng sa tlhahiso ea bongata; li-grids tse atolositsoeng li fokotsa litefiso tsa chelete ka 70%, tse loketseng merero e sa tsotelleng lit?enyehelo.
Tataiso ea kopo ea indasteri
3. Maemo a khothalelitsoeng
| Thekenoloji | Lisebelisoa |
|---|---|
| Grid e Atolositsoeng | ? Libetri tsa likoloi tsa SLI (> 100k liyuniti / khoeli) |
| ? Merero ea ESS e sa tsotelleng lit?enyehelo (40% e tlase ea CAPEX) | |
| ? Meralo ea grid e emeng (lipaterone tsa daemane / khutlonnetsepa) | |
| Grid e Tempetsoeng | ? Libetri tsa ho emisa / tse tebileng (> li-cycle tse 1,200, ho latela IEC 61427) |
| ? Li-geometri tsa tloaelo (mahe a linotsi / li-radial grid) | |
| ? Mamello e nepahetseng haholo (phapang ea botenya |
Tlhahlobo ea Boemo:
- Sistimi ea ho Qala-Stop: Matla a ho tiea a li-grids (55-62 MPa) le bophelo ba mokhathala (8,000+ cycles) li kopana le litlhoko tsa khafetsa tsa ho nt?a tefiso.
- Merero ea ESS: Lit?enyehelo tse atolositsoeng tsa li-grids (liyuniti tse 145 USD/10k) li t?oanela ho romelloa ha CAPEX-sensinsitive, ka meralo e tloaelehileng e nolofalletsang ho thella.
Mekhoa e Mecha le Lit?upiso
- Li-Geometri tsa Grid tse tsoetseng pele: Li-grid tse nang le setempe li thusa 18% ho kenya thepa e sebetsang ka holimo ka meaho ea khekhe ea linotsi, e tiisitsoeng mererong ea ESS ea ho theha grid (mohlala, Xinjiang Bazhou Shared ESS).
- Theknoloji ea Mold: Mefuta e nepahetseng ea GREE's ±0.001mm le lebelo la setempe sa 380-strokes/min li potlakisa ho amoheloa ka libeteri tsa pele tsa EV.
Ho feta 95% Bareki ba Thabileng!
Amohela ka mofuthu bareki bohle ba bacha le ba khale ho etela k'hamphani ea rona. Sehlopha sa barekisi ba litsebi se fana ka karabelo e potlakileng le lit?ebeletso tse ntle. Re lula re le t?ebeletsong ea hau haeba u na le litlhoko leha e le life. Re lebeletse t?ebelisano-'moho e tebileng ea bokamoso le katleho ea bobeli!
ITHUTE HAHOLOANYANE